PROTOTYPE, POC AND MODERNISATION

Device software prototyping and modernisation

Do you have new hardware, a working prototype or an existing device that needs further development? We can take responsibility for the agreed software scope needed to bring the product up, validate critical assumptions or prepare its next generation.

We work with device and machine manufacturers that do not have a complete software team or need additional capability in a specific area: device logic, hardware integration, HMI, diagnostics or commissioning on the physical device.

When it makes sense to start with a prototype

A prototype or proof of concept is useful when a specific technical or product uncertainty needs to be resolved before a larger investment.

A PoC does not need to be a smaller version of the complete product. It should answer a defined question, for example:

  • whether the chosen communication and data exchange approach works on the available hardware
  • whether the process logic can be run correctly on the device
  • whether data from the agreed components is sufficient to support the required decisions
  • whether the device workflow is clear to users
  • whether the proposed architecture provides a sound basis for the next development stage

We can start with an existing device, prototype electronics or a selected hardware platform. The first stage is scoped around the risk that actually needs to be resolved.

If the uncertainty concerns the user workflow, an HMI prototype may be enough. If it concerns the process, communication or device behaviour, the validation needs to include the relevant software layer and physical hardware.

What should be checked before device software deployment?

When an existing device needs modernisation

Not every project starts with a new product. Often the starting point is a device that works, but its current architecture, codebase or limited team capacity makes further development difficult.

Modernisation may be needed when:

  • the current software makes new features difficult to add
  • the device needs a new generation of HMI
  • the operating logic is fragmented or difficult to extend
  • components, communication methods or product requirements are changing
  • a new module needs to work with the existing solution
  • responsibility needs to be split clearly between legacy and new software
  • the internal team is maintaining the current product but has no capacity for its next version

We do not assume that the entire solution should be rewritten from scratch. We first establish which parts still serve their purpose, what is genuinely restricting product development and where a change will deliver a justified benefit.

Modernisation may cover a single layer, a defined process or the staged replacement of selected parts of the solution.

HMI and embedded UI design for devices

How we assess an existing system

Before modernisation begins, we need to separate architectural issues from problems caused by a particular implementation, incomplete documentation or hardware constraints.

We review areas such as:

  • what the device does today and which functions must be preserved
  • which hardware versions and configurations exist in the product
  • whether the available code can be built and run repeatably
  • how responsibility is divided between device logic, HMI, backend and service functions
  • which interfaces and dependencies are documented
  • how problems are diagnosed and new versions are currently verified
  • where a new scope can be separated safely without stopping the rest of the product development

The initial assessment should produce a concrete plan: what to retain, what needs to change, the main risks and the right starting stage.

If the current state does not support a reliable estimate for the complete modernisation, we propose a limited technical stage instead of giving a misleadingly precise quotation.

What the first stage may include

The first stage should produce a result that supports a decision about further development.

For a new device or prototype

  • a PoC focused on one critical uncertainty
  • bringing up an agreed part of the device logic
  • integration with selected components through available interfaces
  • an HMI prototype and validation of the main user workflows
  • checking how the device, HMI and backend work together
  • validation on physical hardware
  • a recommendation for the next architecture and order of work

For an existing device

  • assessment of a selected part of the current solution
  • separation of the function that needs further development
  • a new HMI layer that works with the existing logic
  • restructuring a selected process or set of device states
  • integration of a new feature or agreed component
  • a defined way for legacy and new software to work together
  • improved diagnostics needed for further development
  • a working demonstrator and a plan for the next stages

We do not build every layer immediately if it is not needed to solve the problem or reduce the main project risk.

STAGED DEVELOPMENT

How we reduce project risk

We divide the work into stages, each with a defined objective, scope and acceptance criteria.

How we work remotely with client hardware

At the start we agree:

  • which question the stage needs to answer
  • what is already available on the client side
  • which hardware we will work with
  • which parts of the existing solution remain unchanged
  • which dependencies may affect the outcome
  • what will justify moving to the next stage

We run and verify the agreed scope on the physical device or a comparable platform. If the hardware remains at the client's site, we can agree remote access and a practical validation setup.

Each stage ends with a concrete result: a working scope, validation outcome, known limitations and a recommendation for what to do next.

A prototype is not automatically ready for deployment. Likewise, modernising one layer does not remove every limitation inherited from the existing system. We define these boundaries before work begins.

RELATED PROJECTS

Experience with physical devices and operator interfaces

Trioxygene – software running on a physical device

The starting point was an existing prototype of a device that treats objects with ozone inside an enclosed chamber.

Renau Digital developed software covering the process logic, integration with components and sensors, a touchscreen HMI, diagnostics and service views. The system supports local operation of its core functions and was commissioned on the physical device.

The project shows how an existing prototype can be developed into a working software scope connected to the real device process.

View the Trioxygene case study

QSR operator panel – a new device interaction layer

For a foodservice device used in an intensive QSR environment, we designed the interface architecture and operating logic of the operator panel.

The project organised program selection, parameter presentation and the active process stage. It shows how a new HMI generation can be designed for an existing device category without presenting the project as a modernisation of the remaining software layers.

View the QSR operator panel project
View other projects

Renau Digital's scope of responsibility

We can take responsibility for a larger agreed part of the device software, a selected layer of the existing solution or the first stage needed to support an investment decision.

The Renau Digital scope may include

  • assessment of the available solution and dependencies between its layers
  • development of a prototype or PoC
  • device processes and state logic
  • integration with agreed components through available interfaces
  • HMI and interaction logic
  • communication with a backend or other agreed systems
  • diagnostics and service functions
  • commissioning and validation of the agreed scope on the device
  • planning a staged transition between legacy and new software

The client or specialist partners remain responsible for

  • hardware design and production
  • electronics and PCB design
  • mechanical design
  • certification
  • regulatory requirements

At the start, we agree responsibilities, access to the device, interface documentation, acceptance criteria and the way we will work with the client's team or hardware partner.

Embedded software and hardware integration for devices and machines

Do you have a prototype or device whose software needs a next stage?

We will assess whether the right first step is a PoC, an assessment of the existing solution, modernisation of a selected layer or responsibility for a larger scope.

Tell us briefly:

  • what the device does
  • which hardware is available
  • what currently works
  • what is limiting further development
  • what software support you need

This website uses cookies and similar technologies to analyse traffic and protect the contact form from spam.

For more information, see our Privacy Policy.